D&K CONSTRUCTION & ENGINEERINGD&K CONSTRUCTION & ENGINEERING
Partition works

Partition Works Singapore

Add a room without touching a single load-bearing wall.

Drywall, glass, and aluminium partitions to add rooms or divide spaces — insulated where sound matters, for homes, shops, and offices.

  • Drywall & glass partitions
  • Sound insulation options
  • Add rooms without hacking

Island-wide · Singapore

HDB, condominium, landed, and commercial properties — one contractor team, written quotes before work starts.

Overview

Why this work is worth doing properly.

A partition is the fastest way to change how a space works — turning an oversized living area into an extra bedroom, or an open-plan office into meeting rooms. Because it is stud-framed rather than masonry, it goes up quickly, comes down cleanly, and does not load the structure.

We build drywall, glass, and aluminium partitions for homes, shops, and offices, with insulation where sound matters and openings framed for doors and glazing. Each partition is set out square, boarded, and finished paint-ready.

HDB flatsCondominiumsLanded homesOfficesRetail & F&B

What we cover

Partition Works works we carry out.

Drywall partitions

Stud-framed partition walls to create bedrooms, storerooms, or meeting rooms, boarded both sides and finished flat.

Sound-insulated walls

Acoustic insulation and double boarding where privacy matters — between bedrooms, offices, or a home and a shared wall.

Glass and aluminium partitions

Framed and frameless glass partitions for offices and shops where daylight and sightlines need to be kept.

Door and opening framing

Openings framed and reinforced for swing or sliding doors, glazing, and pass-through hatches.

How it works

From your first message to a clean handover.

  1. 01

    Plan the layout

    We mark the partition line, check ventilation and lighting for the new space, and flag any HDB or building constraints.

  2. 02

    Frame the studs

    Metal or timber studs are fixed to floor, wall, and ceiling, set plumb and square with openings framed for doors.

  3. 03

    Insulate and board

    Insulation is fitted where specified, then the frame is boarded both sides and openings are trimmed.

  4. 04

    Tape and finish

    Joints taped and skimmed, corners beaded, and the wall left paint-ready with door frames set for the carpenter.

Questions

Partition Works FAQs

Still unsure? Call +65 9348 1142 and speak to someone who does the work.

Can I add a bedroom with a partition wall?

Yes — a stud-framed drywall partition is the usual way to create an extra bedroom. We check ventilation, lighting, and any HDB or building restrictions on the layout, and can add insulation for sound before boarding.

Are partition walls soundproof?

A standard partition reduces sound; for genuine privacy we add acoustic insulation in the cavity and double-board one or both sides. Full soundproofing also depends on sealing gaps at the floor, ceiling, and door.

Can the partition be removed later?

Yes. Because a drywall partition is stud-framed and not load-bearing, it can be taken down cleanly, with the floor and ceiling made good afterwards. That is one of the main advantages over a masonry wall.

Get started

Tell us about your partition works job and we will quote it clearly.

Send photos over WhatsApp for a fast estimate, or call us to arrange a site visit anywhere in Singapore.